AVIATICON Finkofreeze P12++ BEF

AVIATICON Finkofreeze P12++ BEF is a nitrite, amine, phosphate, 2-ethylhexanoic acid and borate-free radiator protection concentrate based on monoethylene glycol. It is based on an OAT technology additive package with mineral inhibitors (silicate).

AVIATICON Finkofreeze P12++ BEF provides excellent protection for engines against corrosion, overheating and frost. It was developed to protect modern cooling systems in internal combustion engines made of aluminum and aluminum alloys.

AVIATICON Finkofreeze P12++ BEF offers excellent long-term protection. However, we recommend changing the coolant after 5 years or after 250,000 km for passenger cars and 1,000,000 km for commercial vehicles (whichever comes first).

It is suitable for both petrol and diesel engines and meets the requirements of OEMs who prefer a combination of bio and silicate technology.

AVIATICON Finkofreeze P12++ BEF is a concentrate and must be diluted with water before use. It may only be used in a concentration of at least 33% by volume up to a maximum of 60% by volume. We recommend using it with demineralized or distilled water.,

Mixing table:

frost resistance until about.	mixing ratio Concentrate : water
-37°C	1:1
-27°C	1:1.5
-20°C	1 : 2

The recommendations of the original equipment manufacturers (OEMs) must be observed.

Application Notes:

• Never use coolant concentrate AVIATICON Finkofreeze P12++ BEF pure, always mix with water.
• Pay attention to the correct preparation water (clean water) according to the manufacturer's specifications
• Pay attention to the correct mixing ratio
• If in doubt, switch to ready-mix
• Radiator protection agents from different technologies should not be mixed with each other
• Observe the instructions of the unit manufacturer
• The concentration of AVIATICON Finkofreeze P12++ BEF should never be less than 33% and never more than 60%
• Recommendation Mixture 50:50 and the use of demineralized or distilled water