AVIATICON Finkofreeze P12+ BEF

AVIATICON Finkofreeze P12+ BEF is a silicate, nitrite, amine, 2-ethylhexanoic acid and phosphate-free coolant concentrate based on ethylene glycol with an additive package based on OAT technology. It is also particularly suitable for aluminum engines and allows change intervals of up to a maximum of six years.

AVIATICON Finkofreeze P12+ BEF is a concentrated engine coolant and must be diluted with clean water before use in the cooling system.

It prevents frost and corrosion damage in the cooling water circuits of combustion engines and cavitation on pump segments. Inorganic inhibitors are responsible for corrosion protection in the cooling system.

AVIATICON Finkofreeze P12+ BEF offers reliable corrosion protection in conventional and aluminum engines of passenger cars up to 250,000 km, in commercial vehicle and bus engines up to 500,000 km.

When changing, please drain and flush cooling systems, heating systems and expansion tanks. The change intervals for coolants of the respective manufacturers should not be exceeded.

Mixing table:

frost resistance until about.	mixing ratio Concentrate : water
-37°C	1:1
-27°C	1:1.5
-18°C	1 : 2

Application Notes:

• Never use coolant concentrate AVIATICON Finkofreeze P12+ BEF pure, always mix with water.
• Pay attention to the correct preparation water (clean water) according to the manufacturer's specifications
• Pay attention to the correct mixing ratio
• If in doubt, switch to ready-mix
• Radiator protection agents from different technologies should not be mixed with each other
• Observe the instructions of the unit manufacturer
• The concentration of AVIATICON Finkofreeze P12+ BEF should never be less than 33% and never more than 60%
• Recommendation Mixture 50:50 and the use of demineralized or distilled water